LUMOS - A Sensitive and Reliable Optode System for Measuring Dissolved Oxygen in the Nanomolar Range: e0128125

• Published in: PloS one Vol. 10; no. 6
• Main Authors: Lehner, Philipp, Larndorfer, Christoph, Garcia-Robledo, Emilio, Larsen, Morten, Borisov, Sergey M, Revsbech, Niels-Peter, Glud, Ronnie N, Canfield, Donald E, Klimant, Ingo
• Format: Journal Article
• Language: English
• Published: 01.06.2015
• ISSN: 1932-6203
• DOI: 10.1371/journal.pone.0128125

Most commercially available optical oxygen sensors target the measuring range of 300 to 2 mu mol L super(-1). However these are not suitable for investigating the nanomolar range which is relevant for many important environmental situations. We therefore developed a miniaturized phase fluorimeter based measurement system called the LUMOS (Luminescence Measuring Oxygen Sensor). It consists of a readout device and specialized "sensing chemistry" that relies on commercially available components. The sensor material is based on palladium(II)-5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorphenyl)-por p hyrinembedded in a Hyflon AD 60 polymer matrix and has a KSV of 6.25 x 10 super(-3) ppmv-1. The applicable measurement range is from 1000 nM down to a detection limit of 0.5 nM. A second sensor material based on the platinum(II) analogue of the porphyrin is spectrally compatible with the readout device and has a measurement range of 20 mu M down to 10 nM. The LUMOS device is a dedicated system optimized for a high signal to noise ratio, but in principle any phase flourimeter can be adapted to act as a readout device for the highly sensitive and robust sensing chemistry. Vise versa, the LUMOS fluorimeter can be used for read out of less sensitive optical oxygen sensors based on the same or similar indicator dyes, for example for monitoring oxygen at physiological conditions. The presented sensor system exhibits lower noise, higher resolution and higher sensitivity than the electrochemical STOX sensor previously used to measure nanomolar oxygen concentrations. Oxygen contamination in common sample containers has been investigated and microbial or enzymatic oxygen consumption at nanomolar concentrations is presented.