Influence of Ag concentration on the structure, optical and electrical properties of SnS^sub 2^:Ag thin films prepared by spray pyrolysis deposition

• Published in: Journal of materials science. Materials in electronics Vol. 28; no. 5; p. 3970
• Main Authors: Fadavieslam, M R, Kazemi, A
• Format: Journal Article
• Language: English
• Published: New York Springer Nature B.V 01.03.2017
• ISSN: 0957-4522; 1573-482X
• DOI: 10.1007/s10854-016-6009-9

(ProQuest: ... denotes formulae and/or non-USASCII text omitted; see image) Ag-doped tin-sulfide thin films were deposited with in spray pyrolysis method at T = 425 °C on soda lime glass substrates. The effects of Ag doping were investigated on the structural, optical, and electrical properties of thin films. Double deionized water was used as a precursor solution in which tin chloride (SnCl45H2O) and thiourea (CS(NH3)2) in addition to silver acetate (AgC2H3O2) were dissolved. All in all resulted to preparation of SnS2:Ag thin films with ... The (001) plane is the preferred orientation of the SnS2 phase which is analyzed by X-ray diffraction (XRD). The intensity of mentioned peak has an increasing trend, generally, with increasing Ag doping concentration. Thin films have spherical grains as is shown in SEM images. Increasing doping concentration from 1 to 4%, causes decrease in: single-crystal grains from 14.68 to 6.31 nm, optical band gap from 2.75 to 2.62 eV, carrier concentration from 3.11 × 1017 to 2.58 × 1017 cm-3, and Hall mobility from 1.81 to 0.13 cm2/v s, as well as increase in: average grain size, generally, from 70 to 79 nm and electrical resistance from 11.11 to 181.26 Ω cm, respectively. The majority carriers are electrons for these films as is concluded from Hall Effect measurements.