Influence of defect characteristics on tensile deformation of an additively manufactured stainless steel: Evolutions of texture and intergranular strain

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Vol. 791
• Main Authors: Choo, Hahn, Koehler, Michael R., White, Logan P., Ren, Yang, Morin, Derek, Garlea, Elena
• Format: Journal Article
• Language: English
• Published: United States Elsevier 01.07.2020
• Subjects: additive manufacturing; deformation; diffraction; laser powder bed fusion; MATERIALS SCIENCE; steel; texture
• ISSN: 0921-5093; 1873-4936

The micromechanics of plastic deformation behavior of a selective laser melt processed austenitic stainless steel were studied by investigating the evolutions of texture and intergranular strain using in situ high-energy synchrotron x-ray diffraction (sXRD). The effects of defect characteristics on tensile behavior were studied using three different samples: a near full-density sample with elliptical closed voids and two samples with lack-of-fusion (LOF) defects tensile loaded either perpendicular or parallel to their major axes. The evolutions of pole figures and inverse pole figures show that the full-density specimen develops a strong (111)/(200) fiber texture along the loading direction. For both LOF specimens, the evolution of texture is qualitatively similar to the full-density counterpart, but the development of the fiber texture was much slower, indicating a limited plasticity at a given macroscopic strain. The intergranular strain evolution in the full-density specimen is similar to that of a wrought 316L stainless steel. Conversely, a significantly different intergranular strain development was observed in a LOF specimen, where tensile strain development was observed in both the axial and transverse directions. Finally, the influence of defect type, density, and orientation on the local stress states in the steel matrix and the evolutions of intergranular strains is discussed.