CCM용융에 대한 유리용융 조건연구

• Published in: 대한금속·재료학회지, 46(2) pp. 65 - 68
• Main Authors: 진현주, 이규호, 장영재, 배소영, 김태호, 정영준, 김영석, 이강택, 류봉기
• Format: Journal Article
• Language: Korean
• Published: 대한금속·재료학회 01.02.2008
• Subjects: 재료공학
• ISSN: 1738-8228; 2288-8241

Generally CCM (cold crucible melting) is not suitable for melting glass. However, in this study we described the quantitative relationship between the basic property of glass and power balance, the power absorption in the melt, the losses in the coil and the cold crucible, for melting glass in CCM. The dependence of power balance on the applied frequency and the electric conductivity has been found. Above 300 kHz, the glass (B) contained alkali ion which has the low resistance 3.0 Ω·cm at 900o C and 1.36 Ω·cm at 1,100o C was melted easily and 60% of the overall power was absorbed in the melt and 30% and 10% of the overall power was lost in the cold crucible and coil respectively. Under the same condition, the glass (A) contained non-alkali ion was not melted easily and 50% of the overall power was absorbed in the melt and 40% and 10% of the overall power was lost in the cold crucible and coil respectively. In conclusion, the small absorbed power of the overall power in melt prevented a successful melting as for glass A, and the successful melting depends on the relative size of the absorbed power in melt irrespective of the melting volume. Hence, as typical for direct induction heating method(CCM), the successful melting strongly depended on the chosen working frequency based on electric conductivity of glass, power balance and the control of the critical power which was absorbed in melt. KCI Citation Count: 0