Study on Current Limiting Characteristics of YBCO Thin-Film Wire with Insulation Layer

• Published in: Transactions on electrical and electronic materials Vol. 14; no. 1; pp. 20 - 23
• Main Authors: Doo, Seung-Gyu, Du, Ho-Ik, Jeon, An-Gyoon
• Format: Journal Article
• Language: Korean
• Published: 2013
• Subjects: Fault current; YBCO thin film wire; Insulating layer; Recovery characteristics
• ISSN: 1229-7607; 2092-7592

When applying superconducting wire to power machines, an investigation needs to be carried out on the characteristics of wire phase changes in connection with the insulating layer. This study examined trends in the increase of the wire's resistance and the characteristics of its recovery from quenching by a current-applied cycle at temperatures of 90 K, 180 K, and 250 K. The procedure was conducted based on the thickness and presence (or absence) of the insulating wire layers. To achieve this, YBCO thin-film wires with the same critical temperatures were prepared with copper and stainless steel stabilizing layers. At levels (-one, three, and five-), with superior performance, polyimide pressure-sensitive adhesive tape was attached to the wires at a very low temperature. The eight prepared test samples were wound around the linear frames. The wire's voltage and current created from the phase change characteristics were measured at the wire's prescribed temperature, using the four-point probe method. The wire's resistance and recovery characteristics were examined for each cycle at temperatures of 90 K, 180 K, and 250 K.