An A/D interface based on ∑△ modulator for thermal vacuum sensor ASICs

A newΣΔmodulator architecture for thermal vacuum sensor ASICs is proposed.The micro-hotplate thermal vacuum sensor fabricated by surface-micrornachining technology can detect the gas pressure from 1 to 10~5 Pa. The amplified differential output voltage signal of the sensor feeds to theΣΔmodulator to...

Full description

Saved in:
Bibliographic Details
Published inJournal of semiconductors no. 7; pp. 115 - 120
Main Author 李金凤 唐祯安
Format Journal Article
LanguageChinese
Published 2010
Subjects
Online AccessGet full text
ISSN1674-4926

Cover

More Information
Summary:A newΣΔmodulator architecture for thermal vacuum sensor ASICs is proposed.The micro-hotplate thermal vacuum sensor fabricated by surface-micrornachining technology can detect the gas pressure from 1 to 10~5 Pa. The amplified differential output voltage signal of the sensor feeds to theΣΔmodulator to be converted into digital domain.The presentedΣΔmodulator makes use of a feed-forward path to suppress the harmonic distortions and attain high linearity.Compared with other feed-forward architectures presented before,the circuit complexity,chip area and power dissipation of the proposed architecture are significantly decreased.The correlated double sampling technique is introduced in the 1st integrator to reduce the flicker noise.The measurement results demonstrate that the modulator achieves an SNDR of 79.7 dB and a DR of 80 dB over a bandwidth of 7.8 kHz at a sampling rate of 4 MHz.The circuit has been fabricated in a 0.5μm 2P3M standard CMOS technology.It occupies an area of 5 mm~2 and dissipates 9 mW from a s
Bibliography:integrated sensor; analog to digital conversion; feed-forward path; correlated double sampling; ΣΔmodulator
integrated sensor
ΣΔmodulator
TP212.11
correlated double sampling
analog to digital conversion
11-5781/TN
TN761
feed-forward path
ISSN:1674-4926