An evaluation of the Y2O3:Eu3+ scintillator for application in medical x-ray detectors and image receptors

• Published in: Medical physics (Lancaster) Vol. 23; no. 12; p. 1965
• Main Authors: Cavouras, D, Kandarakis, I, Panayiotakis, G S, Evangelou, E K, Nomicos, C D
• Format: Journal Article
• Language: English
• Published: United States 01.12.1996
• Subjects: Biophysical Phenomena; Biophysics; Europium; Evaluation Studies as Topic; Humans; Luminescent Measurements; Radiographic Image Enhancement - instrumentation; Radiographic Image Enhancement - methods; Scintillation Counting - instrumentation; Scintillation Counting - methods; Technology, Radiologic; X-Ray Intensifying Screens; Yttrium
• ISSN: 0094-2405
• DOI: 10.1118/1.597769

The suitability off a Y2O3:Eu3+ scintillator for use in radiation detectors and medical image receptors was studied. Y2O3:Eu3+ was used in the form of laboratory prepared screens of different coating thicknesses. The x-ray luminescence efficiency of the screens was measured for tube voltages between 50-200 kVp and in both transmission and reflection modes of observation. The intrinsic x ray to light conversation efficiency (nc) and other parameters of the Y2O3:Eu3+ phosphor material related to optical scattering, absorption, and reflection were determined. These were used in the calculation of the image transfer characteristics, MTF and zero frequency DQE, for various screen coating thicknesses and x-ray tube voltages. The light emission spectrum of Y2O3:Eu3+ was measured (narrow band peak at 613 nm) and its spectral compatibility to the spectral sensitivity of several commonly employed optical photon detectors was determined. The x-ray luminescence efficiency varied with x-ray tube voltage, attaining maximum value at about 80 kVp for all screen thicknesses. It also varied with coating thickness reaching 25 microW m(-2)/mR s(-1) and 18 microW m(-2)/mR s(-1) at 175 mg/cm2 for reflection and transmission modes, respectively. The intrinsic x ray to light conversion efficiency and the image transfer characteristics were found to be comparable to several commercially used phosphors: nc = 0.095, MTF0.05 ranged between 10 and 25 line pairs per mm and peal values of DQE(0) varied between 0.33 and 0.14 in the coating thickness and kVp ranges useful for x-ray imaging. Spectral compatibility to some red sensitive optical photon detectors was excellent (0.9 or better). Results indicated that Y2O3:Eu3+ is a medium to high overall performance material that could be used in medical x-ray detectors and image receptors.