Three-dimensional anodes prepared by electrodeposition of[...]-PbO2 onto reticulated vitreous carbon with different porosities

The aim of this study was to obtain a tridimensional electrode with an even greater specific surface area (a s), using the electrodeposition of PbO2 films onto 45, 60, and 80 ppi RVC substrates applying different current densities. The kinetics and efficiency of decolorization of Reactive Blue 19 (R...

Full description

Saved in:
Bibliographic Details
Published inJournal of materials research Vol. 31; no. 20; p. 3168
Main Authors Farinos, Rosimeire M, Ruotolo, Luís A M
Format Journal Article
LanguageEnglish
Published Warrendale Springer Nature B.V 28.10.2016
Subjects
Efficiency
Effluents
Electrodes
Electrolytes
Energy consumption
Experiments
Materials research
Oxidation
Pollutants
Online AccessGet full text

Cover

More Information
Summary:The aim of this study was to obtain a tridimensional electrode with an even greater specific surface area (a s), using the electrodeposition of PbO2 films onto 45, 60, and 80 ppi RVC substrates applying different current densities. The kinetics and efficiency of decolorization of Reactive Blue 19 (RB19) dye achieved with the 60 ppi RVC/PbO2 were higher than obtained with a flat PbO2 electrode and 45 ppi RVC/PbO2, due not only to a greater electrochemically active area, but also especially due to the substantial increase in mass transfer caused by the turbulence generated by the porous matrix. It was found that the coating and the formation of[...]-PbO2 was only possible on the 60 ppi substrate applying 3.5 mA/cm2; in the case of the 80 ppi substrate, the uneven distribution of potential and current within the porous electrode did not allow establishment of suitable operational conditions that permitted complete and uniform coating of the substrate.
ISSN:0884-2914
2044-5326
DOI:10.1557/jmr.2016.354