Influence of Grease Consistency on the Wear of Gear Surfaces

• Published in: Tribology and Lubricants Vol. 38; no. 3; pp. 115 - 119
• Main Authors: Chen-Xiao Li, Haneum Park(박한음), Chul-Hee Lee(이철희)
• Format: Journal Article
• Language: English
• Published: 한국트라이볼로지학회 01.06.2022
• Subjects: 기계공학; Pitting; Grease; Gear; Consistency; Surface wear
• ISSN: 2713-8011; 2713-802X

This paper selected three kinds of grease with the same type but different consistency for the experiment. The purpose of the experiment is tested the effect of different consistency of grease on the wear of the gear surface. Different torque test groups were selected in the test, and the lubrication effect of different greases was tested in the test groups with the same torque. After each set of tests, the wear of the gear surfaces was observed and recorded. The data recorded in the experiment included the area of the wear area on the gear surface, the type of wear and the volume of wear. After the test, the gear surface roughness was measured. By calculating the wear volume, the effects of different concentrations of grease on the gear surface wear were compared. The experimental results show that under different stress conditions, the consistency of the grease has a great influence on the lubricating effect of the gear surface and the gear wear. Under the condition with low speed and high torque, different grease consistency affect the gear surface wear, the high consistency grease can reduce the wear of the gear surface, so that the gear can get better lubrication effect during the work. KCI Citation Count: 0