하상여과용 다직경 수평집수관의 효능에 대한 실험연구

In order to prevent the decrease in well efficiencies due to friction in the axial flow in long, large-diameter laterals, a multi-diameter lateral was devised and tested through lab-scale sand-box experiments to assess its performance. In the experiment, three different production rates were applied...

Full description

Saved in:
Bibliographic Details
Published inDaehan hwan'gyeong gonghag hoeji Vol. 34; no. 5; pp. 359 - 364
Main Authors 배가람(Gha Ram Bae), 김승현(Seung Hyun Kim)
Format Journal Article
LanguageKorean
Published 대한환경공학회 2012
Subjects
Online AccessGet full text
ISSN1225-5025
2383-7810

Cover

More Information
Summary:In order to prevent the decrease in well efficiencies due to friction in the axial flow in long, large-diameter laterals, a multi-diameter lateral was devised and tested through lab-scale sand-box experiments to assess its performance. In the experiment, three different production rates were applied over the multi-diameter and the three single-diameter laterals to obtain the hydraulic head distributions for each, which was used to assess the performance of the laterals. Results elucidated that the multi-diameter lateral reduced the material cost by more than a third, in comparison to the single-diameter lateral, while maintaining the production rate at higher than 93%, proving its superiority. Furthermore, results indicated that exit velocities exceeding 0.8 m/sec in horizontal wells tended to distort the hydraulic head distribution near the exit, providing evidence of its inefficiency. 장대형 수평집수관은 내부에서 축방향 흐름에 대한 마찰저항으로 인해 우물효율이 낮아지므로 이를 방지하기 위하여 다직경 수평집수관을 제안하였고, 그 효능을 평가하기 위해 실험실 규모의 모래통 실험을 수행하였다. 실험에서는 다직경과 여러 직경의 단직경 집수관에 대해 산출유량을 달리하면서 집수관에서의 수두분포를 파악하였으며, 이를 통해서 집수관의 효능을 평가하였다. 연구결과 다직경 집수관은 단직경에 비해 재료비가 1/3 이상 절감되면서도 그 산출유량은 최대직경의 단직경 집수관의 93% 이상이어서 그 효능이 우수함을 알 수 있었다. 또한, 출구유속이 약 0.8 m/sec 이상에서는 수평집수관의 수두분포가 왜곡되어 수리학적으로 비효율적인 수평우물임을 알 수 있었다.
Bibliography:KISTI1.1003/JNL.JAKO201213660553046
G704-000098.2012.34.5.002
ISSN:1225-5025
2383-7810