Study of temperature rise of a motor-driven implantable assist pump

• Published in: Jinko Zoki Vol. 23; no. 5; pp. 1077 - 1082
• Main Authors: MIKAMI, T, MITAMURA, Y, YASUDA, K, TOMODA, K, OKAMOTO, E, YAMAMOTO, K, ASADA, M
• Format: Journal Article
• Language: Japanese
• Published: JAPANESE SOCIETY FOR ARTIFICIAL ORGANS 1994; 一般社団法人 日本人工臓器学会
• Subjects: FEM; implantable assist pump; LVAD; thermal analysis
• ISSN: 0300-0818; 1883-6097
• DOI: 10.11392/jsao1972.23.1077

Temperature rise was studied in the motor-driven assist pump implanted in sheep and with a finite element methods (FEM) analysis. When the pump was implanted in fat with an actuator energy loss of 5.2W, postoperative temperatures were 41.0°C on the actuator surface and 39.5°C in the surrounding fat. In the case of an implantation of the pump between fat and skin with an actuator energy loss of 5.4W, the actuator surface temperature reached 40.5°C, and after that, the temperature gradually decreased until 39.2°C. The temperature distribution of the surrounding tissue was calculated with the FEM analysis. The analysis showed a possibility of a heat spot over 42°C on the actuator surface and low heat dissipation toward an inside body through a blood pump housing which is made of epoxy resin. Results of in vivo experiments showed that temperature rise of the motor-driven assist pump was within a safe level, but the FEM analysis suggested that more effective heat dissipation was required from the actuator to meet increase of energy loss with increase of pump output.