Study on Machining of Grinding Wheels with Carbide Cutting Tools

The machining of grinding wheel is an important research subject related to wheel finishing process in grinding wheel manufacturing factory, In this study, a turning experiment of grinding wheels has been performed by the use of single-point carbide cutting tools. The work-wheel was 100mm dia. white...

Full description

Saved in:
Bibliographic Details
Published inJournal of the Ceramic Association, Japan Vol. 93; no. 1079; pp. 398 - 403
Main Authors MATSUO, Tetsuo, TSUKAMOTO, Kimihide, KITAMURA, Fukuo
Format Journal Article
LanguageJapanese
Published The Ceramic Society of Japan 01.07.1985
Subjects
Carbide cutting tool
Cutting force
Grinding wheel machinability
Tool wear
Turning experiment
Online AccessGet full text

Cover

More Information
Summary:The machining of grinding wheel is an important research subject related to wheel finishing process in grinding wheel manufacturing factory, In this study, a turning experiment of grinding wheels has been performed by the use of single-point carbide cutting tools. The work-wheel was 100mm dia. white alumina vitrified wheels of different hardness values, while the cutting tool was P 20, K 10, and K 01 cemented carbide tools. The cutting speed ranged from 30 to 150m/min, the maximum depth of cut was 1.0mm, and the feed was 0.2 to 0.6mm/rev. Thus, the tool wear and cutting force were measured under various cutting conditions, and the optimum cutting condition was determined. The results showed that grinding wheel can be easily cut by using a proper carbide cutting tool, such as K 01 or K 10, and by selecting relatively low cutting speeds. The effect of wheel grade on the tool wear and cutting force was specially evident.
ISSN:0009-0255
1884-2127
DOI:10.2109/jcersj1950.93.1079_398