1132. Interference model of conical pick in cutting process

• Published in: Journal of Vibroengineering Vol. 16; no. 1; pp. 103 - 115
• Main Authors: Xiaohui, Liu, Songyong, Liu, Xinxia, Cui, Ping, Tang
• Format: Journal Article
• Language: English
• Published: JVE International Ltd 01.02.2014
• Subjects: Angle; Mathematical models
• ISSN: 1392-8716

The load on conical pick is affected by many factors such as pick geometry and installation angle. In order to decrease the wear and vibration of pick in the cutting process by choosing proper impact angle, the interference mathematical models of straight and revolving cutting were established according to coal cutting theory. Based on this, coal cutting experiment was carried out with different impact angles β, different head face radii of pick body R and different cutting depths d to verify the mathematical model. The results indicate that the picks cutting into coal with a certain installed angle are prone to interfere with coal in the cutting progress. There is a crsitical impact angle, and it is different under different cutting conditions. The critical impact angle decreases with the head face radius of pick body R and cutting depth d. On the condition of given pick geometry and movement parameters, the cutting force of picks or cutting torque of cutting header decreases with the impact angle. When the impact angle of the pick is larger than the critical angle, the load on pick will increase prominently.