S-band Q-switched fiber laser using MoSe2 saturable absorber
A passively Q-switched S-band fiber laser using Molybdenum Diselenide (MoSe2) saturable absorber (SA) is proposed and demonstrated. The SA is fabricated by depositing MoSe2 onto two fiber ferrules using the drop-cast method before heating and connecting the two fiber ferrules to form the SA. The pas...
Saved in:
Published in | Optics communications Vol. 382; pp. 93 - 98 |
---|---|
Main Authors | , , , , , , , , , |
Format | Journal Article |
Language | English |
Published |
Elsevier B.V
01.01.2017
|
Subjects | |
Online Access | Get full text |
Cover
Loading…
Summary: | A passively Q-switched S-band fiber laser using Molybdenum Diselenide (MoSe2) saturable absorber (SA) is proposed and demonstrated. The SA is fabricated by depositing MoSe2 onto two fiber ferrules using the drop-cast method before heating and connecting the two fiber ferrules to form the SA. The passively Q-switched fiber laser designed using the MoSe2 SA has an operational range of 1491.0–1502.0nm. The output pulse train has a pulse-width ranging from 2.0μs to 1.0μs and corresponding repetition rate of between 34.5kHz and 90kHz with increasing pump powers, as well as a signal-to-noise of about 35.97dB. The peak performance of the proposed laser is between 1480.0 and 1490.0nm, corresponding to the first peak gain region with the S-band.
•This is the first time an S-band Q-Switched Fiber Laser using a MoSe2 saturable absorber has been reported.•The laser has an operational range of 1491.0–1502.0nm, making it suitable for operation in the 1-μm region.•The peak performance of the proposed laser is between 1480.0 and 1490.0nm, corresponding to the first peak gain region with the S-band. |
---|---|
ISSN: | 0030-4018 1873-0310 |
DOI: | 10.1016/j.optcom.2016.07.010 |