Economic Galileo E5 Receiver

• Published in: Radioengineering Vol. 21; no. 1; pp. 346 - 355
• Main Authors: P. Kovar, P. Kacmarik, F. Vejrazka
• Format: Journal Article
• Language: English
• Published: Spolecnost pro radioelektronicke inzenyrstvi 01.04.2012
• Subjects: Galileo E5 receiver; Galileo E5 signal processing
• ISSN: 1210-2512

The Galileo system introduces an extremely wideband civil E5 signal for high precision navigation. The structure of the receiver for the E5 signal is complicated due to the signal complexity and the large bandwidth. It is possible to process the whole E5 signal or process separately E5a and E5b parts combining obtained results afterwards (we call here such method as piece-wise processing). The second procedure has three times worse standard deviation of the pseudorange then first one. The main goal of the paper is to present a design of an E5 receiver which we will call the economic E5 receiver (ecoE5). It is built from jointly controlled correlators for the processing of the E5a and E5b signals which are parts of the E5 signal. Control of these partial E5a and E5b correlators is realized by only one delay and one phase lock loops. The performance, i.e. the pseudorange noise and multipath errors, of the receiver equipped with the ecoE5, is only slightly worse (the standard deviation of the pseudorange noise is 10 - 20% larger) than the performance of the optimal E5 receiver and it is much better than the performance of the receiver combining the piecewise (E5a and E5b) measurements. The ecoE5 receiver hardware demands are about one quarter of the hardware demands of the classical E5 receiver.