Solution-processed Sb 2 Se 3 photocathodes under Se-rich conditions and their photoelectrochemical properties

• Published in: RSC advances Vol. 14; no. 1; pp. 59 - 66
• Main Authors: Jin, Hui Jin, Seong, Chaeyong, Choi, Gyu Wan, Seo, Ji-Youn, Son, Min-Kyu
• Format: Journal Article
• Language: English
• Published: England 02.01.2024
• ISSN: 2046-2069; 2046-2069
• DOI: 10.1039/D3RA07023A

In this study, selenium (Se)-rich antimony selenide (Sb Se ) films were fabricated by applying a solution process with the solvents ethylenediamine and 2-mercaptoethanol to optimize the photoelectrochemical (PEC) performance of the Sb Se photocathode. Various antimony (Sb)-Se precursor solutions with different molar ratios of Sb and Se (Sb : Se = 1 : 1.5, 1 : 3, 1 : 4.5, 1 : 7.5, and 1 : 9) were prepared to attain Se-rich fabrication conditions. As a result, the Se-rich Sb Se films fabricated using the Sb-Se precursor solution with a molar ratio of Sb : Se = 1 : 7.5 exhibited an improved PEC performance, compared to the stoichiometric Sb Se film. The charge transport was improved by the abundant Se element and thin selenium oxide (Se O ) layer in the Se-rich Sb Se film, resulting in a decrease in Se vacancies and substitutional defects. Moreover, the light utilization in the long wavelength region above 800 nm was enhanced by the light-trapping effect because of the nanowire structure in the Se-rich Sb Se film. Hence, the optimal Se-rich Sb Se photocathodes showed an improved photocurrent density of -0.24 mA cm at the hydrogen evolution reaction potential that was three times higher than that of the stoichiometric Sb Se photocathodes (-0.08 mA cm ).