Development of a multi-channel piezoelectric acoustic sensor based on an artificial basilar membrane

• Published in: Sensors (Basel, Switzerland) Vol. 14; no. 1; pp. 117 - 128
• Main Authors: Jung, Youngdo, Kwak, Jun-Hyuk, Lee, Young Hwa, Kim, Wan Doo, Hur, Shin
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 01.01.2014; Molecular Diversity Preservation International (MDPI)
• Subjects: Acoustics; Acoustics - instrumentation; artificial basilar membrane (ABM); Basilar Membrane; cochlea; Cochlear implants; Computer simulation; Design; Electrodes; Finite element analysis; Finite element method; Hair analysis; laser Doppler vibrometer (LDV); Lasers; Mathematical models; Membranes; Membranes, Artificial; microelectromechanical system (MEMS); Microelectromechanical systems; Models, Theoretical; Mouth; piezoelectric; Piezoelectricity; Sensors; Signal processing; Thin films; Transplants & implants
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s140100117

In this research, we have developed a multi-channel piezoelectric acoustic sensor (McPAS) that mimics the function of the natural basilar membrane capable of separating incoming acoustic signals mechanically by their frequency and generating corresponding electrical signals. The McPAS operates without an external energy source and signal processing unit with a vibrating piezoelectric thin film membrane. The shape of the vibrating membrane was chosen to be trapezoidal such that different locations of membrane have different local resonance frequencies. The length of the membrane is 28 mm and the width of the membrane varies from 1 mm to 8 mm. Multiphysics finite element analysis (FEA) was carried out to predict and design the mechanical behaviors and piezoelectric response of the McPAS model. The designed McPAS was fabricated with a MEMS fabrication process based on the simulated results. The fabricated device was tested with a mouth simulator to measure its mechanical and piezoelectrical frequency response with a laser Doppler vibrometer and acoustic signal analyzer. The experimental results show that the as fabricated McPAS can successfully separate incoming acoustic signals within the 2.5 kHz-13.5 kHz range and the maximum electrical signal output upon acoustic signal input of 94 dBSPL was 6.33 mVpp. The performance of the fabricated McPAS coincided well with the designed parameters.