Study of Kinetics and the Working Mechanism of Silica-Coated Amino-Functionalized CoFe 2 O 4 Ferrite Nanoparticles to Treat Wastewater for Heavy Metals

• Published in: ACS omega Vol. 9; no. 3; p. 3507
• Main Authors: Saleem, Muhammad Umer, Hussain, Humaira, Shukrullah, Shazia, Yasin Naz, Muhammad, Irfan, Muhammad, Rahman, Saifur, Ghanim, Abdulnoor Ali Jazem
• Format: Journal Article
• Language: English
• Published: United States 23.01.2024
• ISSN: 2470-1343; 2470-1343
• DOI: 10.1021/acsomega.3c07200

This study used a simple coprecipitation method to produce pristine, silica-coated, and amino-functionalized CoFe O nanoadsorbents. Amino-functionalization was done to increase the active surface area and metal ion removal efficiency. Both pristine and functionalized adsorbents were employed to recover Pb(II), Zn(II), and Cu(II) ions from wastewater. The adsorption tests were performed by varying the initial concentration of metal ions and contact time at a fixed pH of 6.5. Atomic adsorption spectroscopy was utilized to detect the proportion of metals removed from water. Additionally, the pseudo-first-order, pseudo-second-order, Freundlich, and Langmuir models were employed to compute the kinetic and isothermic data from metal ion adsorption onto the adsorbents. The amino-functionalized adsorbent showed adsorption capacities of 277.008, 254.453, and 258.398 mg/g for Cu(II), Pb(II), and Zn(II) ions, respectively. According to the adsorption results, the Langmuir isotherm and the pseudo-second-order model best suit the data. The best fitting of the pseudo-second-order model with the data indicates that coordinative interactions between amino groups and metal ions are responsible for chemisorption. The metal ions bind with -NH groups on the adsorbent surface through chelate bonds. Chelate bonds are extremely strong and stable, indicating the effectiveness of the CoFe O @SiO -NH adsorbent in adsorbing heavy-metal ions. The tested adsorbent exhibited good performance, batter stability, and good reusable values around 77, 81, and 76% for Cu(II), Pb(II), and Zn(II) ions, respectively, after five adsorption cycles.