Functionalizing a dentin bonding resin to become bioactive

• Published in: Dental materials Vol. 30; no. 8; pp. 868 - 875
• Main Authors: Tauböck, Tobias T, Zehnder, Matthias, Schweizer, Thomas, Stark, Wendelin J, Attin, Thomas, Mohn, Dirk
• Format: Journal Article
• Language: English
• Published: England Elsevier Ltd 01.08.2014
• Subjects: Advanced Basic Science; Bioactive filler; Biocompatibility; Bioglass; Bis-GMA/TEGDMA; Bisphenol A-Glycidyl Methacrylate - chemistry; Calcium phosphate; Composite material; Curing Lights, Dental; Dental Bonding; Dental materials; Dentistry; Microhardness; Nanoparticles; Particulate composites; Polyethylene Glycols - chemistry; Polymerization; Polymers; Polymethacrylic Acids - chemistry; Resins; Silicon dioxide; Surface Properties; Nanoparticles; Bis-GMA/TEGDMA; Bioglass; Calcium phosphate; Bioactive filler; Microhardness; Composite material
• ISSN: 0109-5641; 1879-0097
• DOI: 10.1016/j.dental.2014.05.029

Abstract Objectives To investigate chemo-mechanical effects of incorporating alkaline bioactive glass nanoparticles into a light-curable dental resin matrix. Methods An unfilled Bis-GMA/TEGDMA material was infiltrated with up to 20 wt% of ultrafine SiO2 –Na2 O–CaO–P2 O5 –Bi2 O3 particles. The unfilled and filled resins were investigated regarding their viscosity before setting and compared to commercially available materials. Set specimens were immersed for 21 days in phosphate buffered saline at 37 °C. Water uptake, pH, Knoop hardness, and degree of conversion of freshly polymerized and stored samples were investigated. Resin surfaces were viewed and mapped in a scanning electron microscope for the formation of calcium phosphate (Ca/P) precipitates. In addition, Raman spectroscopy was performed. Numeric values were statistically compared ( p < 0.01). Results Viscosity increased with particle loading, but remained below that of a flowable dental composite material. Water uptake into and pH induction from the polymerized samples also increased with particle loading ( p < 0.01). The addition of 20 wt% nanoparticles had no significant influence on microhardness, yet it slightly ( p < 0.01) increased the degree of conversion after 21 days. Ca/P precipitates formed on specimens filled with 20 wt% of the particles, while they were scarce on counterparts loaded with 10 wt%, and absent on unfilled resin surfaces. Significance The results of the current study show that a Bis-GMA-based resin can be functionalized using alkaline nanoparticles. A material with bioactive properties and similar hardness as the unfilled resin was obtained by incorporating 20 wt% of ultrafine SiO2 –Na2 O–CaO–P2 O5 –Bi2 O3 particles into the resin matrix.