Early Failure of Lithium–Sulfur Batteries at Practical Conditions: Crosstalk between Sulfur Cathode and Lithium Anode

• Published in: Advanced science Vol. 9; no. 21; pp. e2201640 - n/a
• Main Authors: Shi, Lili, Anderson, Cassidy S., Mishra, Lubhani, Qiao, Hong, Canfield, Nathan, Xu, Yaobin, Wang, Chengqi, Jang, TaeJin, Yu, Zhaoxin, Feng, Shuo, Le, Phung M, Subramanian, Venkat R., Wang, Chongmin, Liu, Jun, Xiao, Jie, Lu, Dongping
• Format: Journal Article
• Language: English
• Published: Germany John Wiley & Sons, Inc 01.07.2022; Wiley; John Wiley and Sons Inc
• Subjects: Batteries; charge failure; Chemistry; Electrodes; Electrolytes; internal short circuit; Lithium; Li–S batteries; Materials Science; Morphology; Scanning electron microscopy; Science & Technology - Other Topics; Spectrum analysis; Sulfur; surface roughness; topography; internal short circuit; charge failure; surface roughness; topography; Li-S batteries
• ISSN: 2198-3844; 2198-3844
• DOI: 10.1002/advs.202201640

Lithium–sulfur (Li–S) batteries are one of the most promising next‐generation energy storage technologies due to their high theoretical energy and low cost. However, Li–S cells with practically high energy still suffer from a very limited cycle life with reasons which remain unclear. Here, through cell study under practical conditions, it is proved that an internal short circuit (ISC) is a root cause of early cell failure and is ascribed to the crosstalk between the S cathode and Li anode. The cathode topography affects S reactions through influencing the local resistance and electrolyte distribution, particularly under lean electrolyte conditions. The inhomogeneous reactions of S cathodes are easily mirrored by the Li anodes, resulting in exaggerated localized Li plating/stripping, Li filament formation, and eventually cell ISC. Manipulating cathode topography is proven effective to extend the cell cycle life under practical conditions. The findings of this work shed new light on the electrode design for extending cycle life of high‐energy Li–S cells, which are also applicable for other rechargeable Li or metal batteries. An active crosstalk occurs between the cathode and lithium (Li) anode, revealing an important factor influencing cycling of rechargeable Li batteries . The rough cathode surface is copied by the soft Li anode, resulting in inhomogeneous current density and exaggerated localized Li plating/stripping, causing an internal short circuit. Manipulation of cathode topography is required to extend the Li‐cell cycle life.