Fabrication of High-Aspect-Ratio 3D Hydrogel Microstructures Using Optically Induced Electrokinetics

• Published in: Micromachines (Basel) Vol. 7; no. 4; p. 65
• Main Authors: Li, Yi, Lai, Sam H S, Liu, Na, Zhang, Guanglie, Liu, Lianqing, Lee, Gwo-Bin, Li, Wen Jung
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 12.04.2016; MDPI
• Subjects: 3D polymer structures; Addition polymerization; Chips; Electrokinetics; hydrogel microstructures; Hydrogels; Microstructure; optically induced electrokinetics; polymer microfabrication; Polymerization; Rapid prototyping; Three dimensional; polymer microfabrication; 3D polymer structures; hydrogel microstructures; optically induced electrokinetics
• ISSN: 2072-666X; 2072-666X
• DOI: 10.3390/mi7040065

We present a rapid hydrogel polymerization and prototyping microfabrication technique using an optically induced electrokinetics (OEK) chip, which is based on a non-UV hydrogel curing principle. Using this technique, micro-scale high-aspect-ratio three-dimensional polymer features with different geometric sizes can be fabricated within 1⁻10 min by projecting pre-defined visible light image patterns onto the OEK chip. This method eliminates the need for traditional photolithography masks used for patterning and fabricating polymer microstructures and simplifies the fabrication processes. This technique uses cross-link hydrogels, such as (PEGDA), as fabrication materials. We demonstrated that hydrogel micropillar arrays rapidly fabricated using this technique can be used as molds to create micron-scale cavities in PDMS ( ) substrates. Furthermore, hollow, circular tubes with controllable wall thicknesses and high-aspect ratios can also be fabricated. These results show the potential of this technique to become a rapid prototyping technology for producing microfluidic devices. In addition, we show that rapid prototyping of three-dimensional suspended polymer structures is possible without any sacrificial etching process.