Gas Barrier, Thermal, Mechanical and Rheological Properties of Highly Aligned Graphene-LDPE Nanocomposites

• Published in: Polymers Vol. 9; no. 7; p. 294
• Main Authors: Gaska, Karolina, Kádár, Roland, Rybak, Andrzej, Siwek, Artur, Gubanski, Stanislaw
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI 21.07.2017; MDPI AG
• Subjects: extrusion; permeability; polymer-matrix composites; rheological properties; thermal properties; polymer-matrix composites; thermal properties; rheological properties; extrusion; permeability
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym9070294

This contribution reports on properties of low-density polyethylene-based composites filled with different amounts of graphene nanoplatelets. The studied samples were prepared in the form of films by means of the precoating technique and single screw melt-extrusion, which yields a highly ordered arrangement of graphene flakes and results in a strong anisotropy of composites morphology. The performed tests of gas permeability reveal a drastic decrease of this property with increasing filler content. A clear correlation is found between permeability and free volume fraction in the material, the latter evaluated by means of positron annihilation spectroscopy. A strong anisotropy of the thermal conductivity is also achieved and the thermal conductivity along the extrusion direction for samples filled with 7.5 wt % of GnP (graphene nanoplatelets) reached 2.2 W/m·K. At the same time, when measured through a plane, a slight decrease of thermal conductivity is found. The use of GnP filler leads also to improvements of mechanical properties. The increase of Young's modulus and tensile strength are reached as the composites become more brittle.