The effects of process variations on residual stress in laser peened 7049 T73 aluminum alloy

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Vol. 349; no. 1-2; pp. 279 - 291
• Main Authors: Rankin, Jon E., Hill, Michael R., Hackel, Lloyd A.
• Format: Journal Article
• Language: English
• Published: Amsterdam Elsevier B.V 25.05.2003; Elsevier
• Subjects: Applied sciences; Exact sciences and technology; Fatigue; Laser peening; Metals. Metallurgy; Polishing. Blast cleaning; Production techniques; Residual stress; Surface treatment; Fatigue; Residual stress; Surface treatment; Laser peening; Resistance strain gauge; Aluminium base alloys; High strength alloy; Laser assisted processing; Experimental study; Surface stresses; Stress distribution; Slitting; Measurement method
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/S0921-5093(02)00811-0

This paper reports measurements of the distribution of residual stress with depth from the surface in laser peened coupons made of a high-strength aluminum alloy. Residual stresses were measured using slitting (also known as the crack compliance method). Measurements were made on several coupons to: compare laser peening (LP) and shot peening (SP) residual stresses; ascertain the influence of LP parameters on residual stress; determine whether tensile residual stress existed outside the peened area; assess the variation of residual stress with in-plane position relative to the layout of the laser spots used for peening; and, determine the importance of a uniform spatial distribution of laser energy within the spot. Residual stress 0.1 mm from the surface due to LP and SP were comparable and the depth of the compressive stress for LP was far greater than for SP. Variations of most LP parameters did not significantly alter residual stress at shallow depths, but greater laser energy and larger layer overlap increased residual stress at depths between 0.2 and 0.6 mm from the surface. Residual stresses adjacent to the peened area were found to be compressive. Decreased levels of surface residual stress were found when laser spots had a non-uniform distribution of laser intensity.