Effect of Thermal Exposure on Microstructure Evolution and Mechanical Properties of TC25G Alloy

• Published in: Materials Vol. 16; no. 12; p. 4462
• Main Authors: Liu, Zhuomeng, Xin, Shewei, Zhao, Yongqing, Zhu, Peiliang, Dang, Bohao, Zhang, Siyuan, Zhou, Wei
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 19.06.2023; MDPI
• Subjects: Aging; Alpha-2 phase (crystals); Analysis; Beta phase; Dispersion hardening alloys; Dispersion strengthening; Engines; Exposure; Heat treatment; High temperature; Mechanical properties; Microstructure; Phase transitions; Precipitates; Room temperature; silicide; Silicides; Solid solutions; Solution strengthening; Specialty metals industry; TC25G alloy; Tensile properties; thermal exposure; Titanium; Titanium alloys; Yield stress; α2 phase; Germany; α2 phase; silicide; thermal exposure; TC25G alloy; mechanical properties
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma16124462

The microstructure and room temperature tensile properties of heat-treated TC25G alloy after thermal exposure were investigated. The results show that the α phase dispersed in the α phase, and silicide precipitated firstly at the α/β phase boundary and then at the dislocation of the α phase and on the β phase. When thermal exposure was 0-10 h at 550 °C and 600 °C, the decrease of alloy strength was mainly due to the dominant effect of dislocations recovery. With the rise and extension of thermal exposure temperature and time, the increasing quantity and size of precipitates played an important role in the improvement of alloy strength. When thermal exposure temperature rose to 650 °C, the strength was always lower than that of heat-treated alloy. However, since the decreasing rate of solid solution strengthening was smaller than the increasing rate of dispersion strengthening, alloy still showed an increasing trend in the range of 5-100 h. When thermal exposure time was 100-500 h, the size of the α phase increased from the critical value of 3 nm to 6 nm, and the interaction between the moving dislocations and the α phase changed from the cutting mechanism to the by-pass mechanism (Orowan mechanism), and thus alloy strength decreased rapidly.