Investigating the Effects of Recycled Aggregate and Mineral Admixtures on the Mechanical Properties and Performance of Concrete

• Published in: Materials Vol. 16; no. 14; p. 5134
• Main Authors: Fawzy, Amal, Elshami, Ahmed, Ahmad, Seleem
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 21.07.2023; MDPI
• Subjects: Admixtures; Aggregates; Aluminum; Analysis; Carbon; Cement hydration; Cementing; Compressive strength; Concrete; Concrete aggregates; Concrete mixing; Concrete properties; Curing; Dolomite; Drinking water; Flexural strength; Granulation; Investigations; Marble; Mechanical properties; Microstructural analysis; Microstructure; Nanoparticles; nanosilica; Raw materials; recycle aggregate; Recycling; Research centers; Slag; Tensile strength; Egypt; compressive strength; concrete; tensile strength; microstructure; recycle aggregate; slag; nanosilica; flexure strength
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma16145134

In this work, the effects of recycled concrete aggregate, modified with mineral admixtures and nanosilica, on the mechanical properties and performance of concrete after curing in tap water for 28 and 90 days were investigated. The compressive (ƒ ), indirect tensile (ƒ ), and flexural (ƒ ) strengths for the cured concrete specimens were measured, and the concrete strength ratios were analyzed. The water and rapid chloride permeabilities were measured. SEM analysis of the microstructure was also performed. The coarse aggregates used were dolomite (control) and recycled concrete aggregate, incorporating different mineral admixtures, including ground, granulated blast slag, granite, and nanosilica. It was found that the slump values of the dolomite concrete decreased compared with recycled aggregate concrete. Compared to the control mix produced with the recycled aggregate, the slump value of the concrete mixes created with the recycled aggregate increased by approximately 11.1% with the addition of binary cementing materials of 1% NS. The results also indicate that the concrete mix containing the recycled aggregate had the highest compressive strength, tensile strength, and flexural strength compared to that of the dolomite aggregate. Regarding the compressive strength, the addition of 1% NS and 15% slag improved the physico-mechanical properties of the recycled aggregate concretes compared to the other mixes after curing in tap water. Compared to the other mixes, the concrete mix containing 1% NS and 15% slag had a comparatively dense and compact microstructure.