Investigation of Alkali-Activated Slag-Based Composite Incorporating Dehydrated Cement Powder and Red Mud

• Published in: Materials Vol. 16; no. 4; p. 1551
• Main Authors: Abadel, Aref A, Alghamdi, Hussam, Alharbi, Yousef R, Alamri, Mohammed, Khawaji, Mohammad, Abdulaziz, Mohammed A M, Nehdi, Moncef L
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 13.02.2023; MDPI
• Subjects: Alumina; Aluminum industry; Aluminum oxide; Analysis; Blast furnace slags; Carbon dioxide; Cement; Compressive strength; Concrete; Construction; Construction industry; curing; dehydrated cement powder; Dehydration; Dosage; Durability; geopolymer; Granulation; Heat; High temperature; Hydration; Investigations; microstructure; Powders; Recycled materials; Red mud; Refuse and refuse disposal; Silica; Slag; Solid wastes; Structural analysis; Substitutes; Sustainable development; Sustainable materials; Waste materials; Workability; compressive strength; geopolymer; slag; microstructure; curing; dehydrated cement powder
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma16041551

Recycled construction cementitious materials (RCCM) and red mud (RM) could be considered a type of discarded material with potential cementitious properties. Generally, landfilling and stacking are utilized to dispose of this type of solid waste, which can be detrimental to the environment and sustainability of the construction sector. Accordingly, a productive process for making eco-efficient alkali-activated slag-based samples with the inclusion of RCCM and red mud is studied in this paper. Dehydrated cement powder (DCP) is attained through the high-temperature treatment of RCCM, and red mud can be obtained from the alumina industry. Subsequently, DCP and RM are utilized as a partial substitute for granulated blast furnace slag (GBFS) in alkali-activated mixtures. Two different batches were designed; the first batch had only DCP at a dosage of 15%, 30%, 45%, and 60% as a partial substitute for GBFS, and the second batch had both DCP and RM at 15%, 30%, 45%, and 60% as a partial substitute for GBFS. Different strength and durability characteristics were assessed. The findings show that when both dehydrated cement powder and red mud are utilized in high quantities, the strength and durability of the specimens were enhanced, with compressive strength improving by 42.2% at 28 days. Such improvement was obtained when 7.5% each of DCP and RM were added. The results revealed that DCP and RM have a negative effect on workability, whilst they had a positive impact on the drying shrinkage as well as the mechanical strength. X-ray diffraction and micro-structural analysis showed that when the amount of DCP and RM is increased, a smaller number of reactive products forms, and the microstructure was denser than in the case of the samples made with DCP alone. It was also confirmed that when DCP and RM are used at optimized dosages, they can be a potential sustainable binder substitute; thus, valorizing wastes and inhibiting their negative environmental footprint.