Development and Processing of New Composite Materials Based on High-Performance Semicrystalline Polyimide for Fused Filament Fabrication (FFF) and Their Biocompatibility

• Published in: Polymers Vol. 14; no. 18; p. 3803
• Main Authors: Polyakov, Igor, Vaganov, Gleb, Didenko, Andrey, Ivan’kova, Elena, Popova, Elena, Nashchekina, Yuliya, Elokhovskiy, Vladimir, Svetlichnyi, Valentin, Yudin, Vladimir
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01.09.2022; MDPI
• Subjects: additive technologies; Benzene; Biocompatibility; carbon fiber; Carbon fibers; Composite materials; Deformation; Diamines; FFF-printing; Fillers; Fractures; Fused deposition modeling; Gamma rays; Heat resistance; Hot pressing; Injection molding; Mechanical properties; Modulus of elasticity; Nanocomposites; Nanofibers; Nanoparticles; polyimide; Polymers; Porosity; Printing; Tensile strength; Toxicity; Unmanned aerial vehicles; Yield stress; Netherlands; Germany; Russia
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym14183803

Samples of composite materials based on high-performance semicrystalline polyimide R-BAPB (based on the dianhydride R: 1,3-bis-(3′,4,-dicarboxyphenoxy)benzene and diamine BAPB: 4,4′-bis-(4″-aminophenoxy)diphenyl)) filled with carbon nanofibers and micron-sized discrete carbon fibers were obtained by FFF printing for the first time. The viscosity of melts of the composites based on R-BAPB, thermal, mechanical characteristics of the obtained composite samples, their internal structure, and biocompatibility were studied. Simultaneously with FFF printing, samples were obtained by injection molding. The optimal concentrations of carbon fillers in polyimide R-BAPB for their further use in FFF printing were determined. The effect of the incorporation of carbon fillers on the porosity of the printed samples was investigated. It was shown that the incorporation of carbon nanofibers reduces the porosity of the printed samples, which leads to an increase in deformation at break. Modification of polyimide with discrete carbon fibers increases the strength and Young’s modulus sufficiently but decreases the deformation at break. The cytotoxicity analysis showed that the obtained composite materials are bioinert.