Radial diffusive samplers for determination of 8-h concentration of BTEX, acetone, ethanol and ozone in ambient air during a sea breeze event

• Published in: Atmospheric environment (1994) Vol. 45; no. 3; pp. 755 - 763
• Main Authors: Roukos, Joelle, Locoge, Nadine, Sacco, Paolo, Plaisance, Hervé
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 2011; Elsevier
• Subjects: Acetone; Adsorbents; air; Applied sciences; Atmospheric pollution; Benzene; BTEX; BTEX (benzene, toluene, ethylbenzene, xylene); chemical concentration; Design of experiment; environmental factors; Ethanol; Ethyl alcohol; Exact sciences and technology; exposure duration; Marine; monitoring; Oxygenated compounds; Ozone; Passive sampling; Pollution; Radial sampler; relative humidity; samplers; Sampling; Sea breeze; temperature; Toluene; wind direction; xylene; BTEX; Sea breeze; Passive sampling; Radial sampler; Oxygenated compounds; Design of experiment; Relative humidity; Volatility; Pollutant formation; Environmental factor; Passive detection; Xylene; Aromatic compound; Adsorbent; Sampling; Organic compounds; Cartography; Atmospheric condition; Hydrocarbon; Toluene; Ozone; Plume; Breeze; BTEX compound; Partial pressure; Surveillance; Sampling rate; Sampler; Air pollution; Industrial area; Factorial design
• ISSN: 1352-2310; 1873-2844
• DOI: 10.1016/j.atmosenv.2010.09.012

The radial diffusive sampler Radiello ® filled with Carbograph 4 was evaluated for monitoring BTEX, ethanol and acetone concentrations for 8-hour exposure time. The sampling rates were first evaluated in an exposure chamber under standard conditions. Benzene and toluene showed the highest sampling rates with satisfactory standard deviations. Ethylbenzene and xylenes showed medium sampling rates but higher standard deviations that can be attributed to a low affinity of these compounds with the adsorbent medium for short sampling time. Acetone has a fair result because of the increase of its partial pressure in the vicinity of the adsorbent surface in the course of sampling. The Carbograph 4 adsorbent does not seem to be suitable for sampling ethanol, likely because of its high volatility. The influences of three environmental factors (temperature (T), relative humidity (RH) and concentration level (C)) on the sampling rates were also evaluated, following a fractional factorial design at two factor levels (low and high). Results were only investigated on benzene, toluene and acetone. Temperature and relative humidity are found to be the most important factors leading to variability of the benzene and toluene sampling rates. The applicability of the sampler for 8-hour sampling was demonstrated by the results of a measurement campaign carried out during a sea breeze event. Mapping of benzene, toluene and acetone concentrations showed the highest concentrations in the industrial zone following the wind direction coming from the North. Nevertheless, the sea breeze tends to reduce the spread of the industrial plumes. On the contrary, the ozone map presents the lowest concentrations at the same industrial area indicating a net consumption of ozone. The highest ozone concentrations were found in the southeastern zone suggesting a local ozone formation.