Micro-mechanical finite element analysis of Z-pins under mixed-mode loading

• Published in: Composites. Part A, Applied science and manufacturing Vol. 78; pp. 424 - 435
• Main Authors: Zhang, B., Allegri, G., Yasaee, M., Hallett, S.R.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.11.2015
• Subjects: B. Delamination; B. Mechanical properties; C. Finite element analysis (FEA); Computer simulation; Failure; Finite element method; Laminates; Mathematical analysis; Modelling; Splitting; Strategy; Z-pinning; Z-pinning; B. Mechanical properties; C. Finite element analysis (FEA); B. Delamination
• ISSN: 1359-835X; 1878-5840
• DOI: 10.1016/j.compositesa.2015.07.006

This paper presents a three-dimensional micro-mechanical finite element (FE) modelling strategy for predicting the mixed-mode response of single Z-pins inserted in a composite laminate. The modelling approach is based upon a versatile ply-level mesh, which takes into account the significant micro-mechanical features of Z-pinned laminates. The effect of post-cure cool down is also considered in the approach. The Z-pin/laminate interface is modelled by cohesive elements and frictional contact. The progressive failure of the Z-pin is simulated considering shear-driven internal splitting, accounted for using cohesive elements, and tensile fibre failure, modelled using the Weibull’s criterion. The simulation strategy is calibrated and validated via experimental tests performed on single carbon/BMI Z-pins inserted in quasi-isotropic laminate. The effects of the bonding and friction at the Z-pin/laminate interface and the internal Z-pin splitting are discussed. The primary aim is to develop a robust numerical tool and guidelines for designing Z-pins with optimal bridging behaviour.