Degradation Investigation of Electrocatalyst in Proton Exchange Membrane Fuel Cell at a High Energy Efficiency

• Published in: Molecules (Basel, Switzerland) Vol. 26; no. 13; p. 3932
• Main Authors: Song, Jie, Ye, Qing, Wang, Kun, Guo, Zhiyuan, Dou, Meiling
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 28.06.2021; MDPI
• Subjects: Catalysts; Cathodes; Communication; degradation; durability; Electric potential; Electrocatalysts; Electrodes; Energy efficiency; Fuel cells; Fuel consumption; Fuel economy; Fuel technology; high energy efficiency; Hydrogen; Investigations; Morphology; Nanoparticles; Particle size; Power plants; proton exchange membrane fuel cell; Proton exchange membrane fuel cells; Pt/C catalyst; Voltage
• ISSN: 1420-3049; 1420-3049
• DOI: 10.3390/molecules26133932

The development of high efficient stacks is critical for the wide spread application of proton exchange membrane fuel cells (PEMFCs) in transportation and stationary power plant. Currently, the favorable operation conditions of PEMFCs are with single cell voltage between 0.65 and 0.7 V, corresponding to energy efficiency lower than 57%. For the long term, PEMFCs need to be operated at higher voltage to increase the energy efficiency and thus promote the fuel economy for transportation and stationary applications. Herein, PEMFC single cell was investigated to demonstrate its capability to working with voltage and energy efficiency higher than 0.8 V and 65%, respectively. It was demonstrated that the PEMFC encountered a significant performance degradation after the 64 h operation. The cell voltage declined by more than 13% at the current density of 1000 mA cm−2, due to the electrode de-activation. The high operation potential of the cathode leads to the corrosion of carbon support and then causes the detachment of Pt nanoparticles, resulting in significant Pt agglomeration. The catalytic surface area of cathode Pt is thus reduced for oxygen reduction and the cell performance decreased. Therefore, electrochemically stable Pt catalyst is highly desirable for efficient PEMFCs operated under cell voltage higher than 0.8 V.