Optimization of anti-reflection moth-eye structures for use in crystalline silicon solar cells

An anti‐reflection (AR) moth‐eye structure made of acrylic resin and deposited on a polyethylene terephthalate (PET) substrate was optimized in the wavelength range from 400 to 1170 nm; crystalline silicon (c‐Si) solar cells function efficiently in this wavelength range. The rigorous coupled wave an...

Full description

Saved in:
Bibliographic Details
Published inProgress in photovoltaics Vol. 19; no. 2; pp. 134 - 140
Main Authors Yamada, Noboru, Kim, Oanh Ngo, Tokimitsu, Toru, Nakai, Yusuke, Masuda, Hideki
Format Journal Article
LanguageEnglish
Published Chichester, UK John Wiley & Sons, Ltd 01.03.2011
Wiley
Subjects
Online AccessGet full text

Cover

Loading…
More Information
Summary:An anti‐reflection (AR) moth‐eye structure made of acrylic resin and deposited on a polyethylene terephthalate (PET) substrate was optimized in the wavelength range from 400 to 1170 nm; crystalline silicon (c‐Si) solar cells function efficiently in this wavelength range. The rigorous coupled wave analysis (RCWA) method was used for optical simulation, and the Taguchi method was used for efficient optimization. The simulation results showed that the reflectance of the optimized structure over the above‐mentioned wavelength range was less than 0.87% and that a minimal reflectance of 0.1% was observed at 400 nm. Experimental results showed that the reflectance of a fabricated moth‐eye structure was less than 1.0% in the wavelength range and that a minimal reflectance of 0.55% was observed at 700 nm. A c‐Si solar cell, which was enclosed in a polyvinyl butyral (PVB) layer of uniform thickness, was coated with the fabricated moth‐eye film, and it was observed that the moth‐eye film increased electric generation (EG) up to 15%, depending on the incident angle. Further, a daily increase in EG of up to 8.7% was estimated on a clear summer day in Japan when the moth‐eye film was used. Copyright © 2010 John Wiley & Sons, Ltd. Anti‐reflection moth‐eye structure made of acrylic resin and deposited on a polyethylene terephthalate (PET) substrate was optimised in wavelength range from 400 to 1170 nm. Experimental results showed that the reflectance of a fabricated moth‐eye structure is less than 1.0% and that a minimal reflectance of 0.55% is observed at 700 nm. A c‐Si solar cell module with the fabricated moth‐eye film increases electric generation up to 15% (relative to the module without moth‐eye), depending on incident angle.
Bibliography:istex:58CE4258B3BB9DA7D417E00F86A62C81A111E262
ArticleID:PIP994
ark:/67375/WNG-N455RT7T-5
ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 23
ISSN:1062-7995
1099-159X
1099-159X
DOI:10.1002/pip.994