Application of nanofibers to improve the filtration efficiency of the most penetrating aerosol particles in fibrous filters

• Published in: Chemical engineering science Vol. 61; no. 20; pp. 6804 - 6815
• Main Authors: PODGORSKI, Albert, BALAZY, Anna, GRADON, Leon
• Format: Journal Article
• Language: English
• Published: Oxford Elsevier Ltd 01.10.2006; Elsevier
• Subjects: Aerosol; Applied sciences; Chemical engineering; Efficiency; Exact sciences and technology; Filtration; Hydrodynamics of contact apparatus; Liquid-liquid and fluid-solid mechanical separations; Nanofibers; Particle; Separations; Particle; Filtration; Nanofibers; Efficiency; Aerosol; Separations; Scanning electron microscopy; Particle size; Hydrodynamics; Image analysis; Surveillance; Pressure drop; Aerosols; Manufacturing; Fiber filter
• ISSN: 0009-2509; 1873-4405
• DOI: 10.1016/j.ces.2006.07.022

Conventional, mechanical fibrous filters made of microfibers exhibit a local minimum of fractional collection efficiency in the aerosol particle size-range between 100 and 500 nm, which is called the most penetrating particle size (MPPS). Simple theoretical calculations predict that this efficiency may be significantly increased using nanofibrous media. The main objective of this paper is an experimental verification of these expectations and simultaneously checking whether this anticipated gain in the filtration efficiency is not overpaid with an excessive pressure drop. For this purpose we developed a modified melt-blown technology, which allowed us to produce filters composed of micrometer as well as nanometer sized fibers. One conventional microfibrous filter and five nanofibrous filters were examined. The complete structural characteristics, pressure drop and efficiency of removal of aerosol particles with diameters 10–500 nm were determined for all media. The results of the experiments confirmed that using nanofibrous filters a significant growth of filtration efficiency for the MPPS range can be achieved and the pressure drop rises moderately. Simultaneously, we noticed a shift of the MPPS towards smaller particles. Consequently, the quality factor for bilayer systems composed of a microfibrous support and a nanofibrous facial layer was considerably higher than this one for a conventional microfibrous filter alone. Additionally, it was found that utilization of many-layer nanofibrous filters combined with a single microfibrous backing layer is even more profitable from the quality factor standpoint. Comparing experimental results with theoretical calculations based on the single-fiber theory we concluded that for microfibrous filters a fairly good agreement can be obtained if the resistance-equivalent fiber diameter is used in calculations instead of the mean count diameter determined from the SEM images analysis; in the latter case, filtration efficiency computed theoretically is slightly overestimated. This is even more evident for nanofibrous media, suggesting that in such case a structural filter inhomogeneity has a strong influence on the filter efficiency and its resistance and one should strive for minimization of this effect manufacturing nanofibrous filters as homogeneous as possible. We can finally conclude that fibrous filters containing nanofibers, which are produced using the melt-blown technique, are very promising and economic tools to enhance filtration of the most penetrating aerosol particles.