Deformation Characteristic and Constitutive Modeling of 2707 Hyper Duplex Stainless Steel under Hot Compression

• Published in: Metals (Basel ) Vol. 6; no. 9; p. 223
• Main Authors: Li, Huabing, Jiao, Weichao, Feng, Hao, Li, Xinxu, Jiang, Zhouhua, Li, Guoping, Wang, Lixin, Fan, Guangwei, Han, Peide
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 12.09.2016
• Subjects: 2707 hyper duplex stainless steel; Austenite; Compression tests; Constitutive equations; constitutive modeling; Constitutive relationships; Correlation coefficients; Deformation; Duplex stainless steels; Dynamic recrystallization; Ferrite; Grain boundaries; hot compression; hot deformation behavior; Hot pressing; Mechanical properties; Metals; Microstructure; Modelling; Precipitates; Softening; Stainless steel; Strain; Strain rate; Temperature; Yield strength
• ISSN: 2075-4701; 2075-4701
• DOI: 10.3390/met6090223

Hot deformation behavior and microstructure evolution of 2707 hyper duplex stainless steel (HDSS) were investigated through hot compression tests in the temperature range of 900-1250 °C and strain rate range of 0.01-10 s-1. The results showed that the flow behavior strongly depended on strain rate and temperature, and flow stress increased with increasing strain rate and decreasing temperature. At lower temperatures, many precipitates appeared in ferrite and distributed along the deformation direction, which could restrain processing of discontinuous dynamic recrystallization (DRX) because of pinning grain boundaries. When the temperature increased to 1150 °C, the leading softening behaviors were dynamic recovery (DRV) in ferrite and discontinuous DRX in austenite. When the temperature reached 1250 °C, softening behavior was mainly DRV in ferrite. The increase of strain rate was conducive to the occurrence of discontinuous DRX in austenite. A constitutive equation at peak strain was established and the results indicated that 2707 HDSS had a higher Q value (569.279 kJ*mol-1) than other traditional duplex stainless steels due to higher content of Cr, Mo, Ni, and N. Constitutive modeling considering strain was developed to model the hot deformation behavior of 2707 HDSS more accurately, and the correlation coefficient and average absolute relative error were 0.992 and 5.22%, respectively.