Influence of spark plasma sintering temperature on the densification and micro-hardness behaviour of Ni-Cr-Al alloy

• Published in: IOP conference series. Materials Science and Engineering Vol. 655; no. 1; pp. 12032 - 12038
• Main Authors: Babalola, B J, Shongwe, M B, Jeje, S O, Rominiyi, A L, Ayodele, O O, Olubambi, P A
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.10.2019
• Subjects: Aluminum base alloys; Densification; Density; Microhardness; Microstructure; Nickel base alloys; Plasma sintering; Spark plasma sintering; Temperature
• ISSN: 1757-8981; 1757-899X; 1757-899X
• DOI: 10.1088/1757-899X/655/1/012032

Sintering temperature is essential towards attaining desired densification and formation of phases which in turn influences the microstructure and properties of a material. In this study, the densification and microhardness behaviour of Ni-Cr-Al alloy prepared by spark plasma sintering (SPS) at different sintering temperatures were investigated. After sintering operation, the density, hardness, phase analysis, and microstructural evolution were investigated using the Archimede's principle, hardness tester, X-ray diffraction (XRD), and scanning electron microscopy (SEM) respectively. The nickel based alloy was sintered at temperatures of 600, 750, 950 and 1100 °C. The results indicated that the densification, microstructure, and hardness values were influenced by changes in the sintering temperature. The relative density increased from 73.89 % at 600 °C to 99.89 % at 1100 °C, while the hardness value was enhanced from 131.9 ± 2.8 HV to 404 ± 1.2 HV respectively.