Solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles as ionophore

• Published in: Talanta (Oxford) Vol. 67; no. 4; pp. 798 - 805
• Main Authors: Wang, Kun, Xu, Jing-Juan, Tang, Kai-Shi, Chen, Hong-Yuan
• Format: Journal Article
• Language: English
• Published: Amsterdam Elsevier B.V 15.10.2005; Oxford Elsevier
• Subjects: Analytical chemistry; Ascorbic acid; Chemistry; Cobalt phthalocyanine nanoparticle; Electrochemical methods; Exact sciences and technology; General, instrumentation; Potentiometry; Redox mechanism; Solid-contact; Solid-contact; Ascorbic acid; Potentiometry; Cobalt phthalocyanine nanoparticle; Redox mechanism; Electrochemical method; Nanoparticle; Selectivity; Coatings; Cobalt; Thin film; Additive; Detection limit; Membrane; Ionophore; Pretreatment; Carbon fiber; Stability; Microsensor; Carbon electrode; Chemical sensor; Colloid; Electrochemical detector; Wire electrode; Plasticizer; Metallophthalocyanine
• ISSN: 0039-9140; 1873-3573
• DOI: 10.1016/j.talanta.2005.04.015

A novel solid-contact potentiometric sensor for ascorbic acid based on cobalt phthalocyanine nanoparticles (NanoCoPc) as ionophore was fabricated without any need of auxiliary materials (such as membrane matrix, plasticizer, and other additives). The electrode was prepared by simple drop-coating NanoCoPc colloid on the surface of a glassy carbon electrode. A smooth, bright and blue thin film was strongly attached on the surface of the glassy carbon electrode. The electrode showed high selectivity for ascorbic acid, as compared with many common anions. The influences of the amount of NanoCoPc at the electrode surface and pH on the response characteristics of the electrode were investigated. To overcome the instability of the formal potential of the coated wire electrode, a novel electrochemical pretreatment method was proposed for the potentiometric sensor based on redox mechanism. This resulting sensor demonstrates potentiometric response over a wide linear range of ascorbic acid concentration (5.5 × 10 −7 to 5.5 × 10 −2 M) with a fast response (<15 s), lower detection limit (ca. 1.0 × 10 −7 M), and a long-term stability. Furthermore, microsensors based on different conductors (carbon fiber and Cu wire) were also successfully fabricated for the determination of practical samples.