Experimental Investigation on the Effect of Graphene Oxide Additive on the Steady-State and Dynamic Shear Properties of PDMS-Based Magnetorheological Elastomer

• Published in: Polymers Vol. 13; no. 11; p. 1777
• Main Authors: Liu, Minzi, Zhang, Mei, Zhang, Jiangtao, Qiao, Yanliang, Zhai, Pengcheng
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 28.05.2021; MDPI
• Subjects: Additives; Carbonyls; Crosslinking; dynamic shear property; Elastomers; Graphene; graphene oxide; Intelligent systems; Magnetic fields; Magnetic properties; magnetorheological effect; magnetorheological elastomers; Microscopy; Morphology; Nanocomposites; Parallel plates; Polydimethylsiloxane; Polymers; Rheology; Shear modulus; Shear properties; Sheets; Solution blending; Steady state; steady-state shear; Stiffening; Stiffness; China
• ISSN: 2073-4360; 2073-4360
• DOI: 10.3390/polym13111777

Isotropic polydimethylsiloxane (PDMS)-based magnetorheological elastomers (MREs) filled with various contents of graphene oxide (GO) additive were fabricated by the solution blending-casting method in this work. The morphologies of the produced MREs were characterized, and the results indicate that the uniform distribution of GO sheets and carbonyl iron particles (CIPs) becomes difficult with the increase of GO content. The steady-state and dynamic shear properties of the MREs under different magnetic field strengths were evaluated using parallel plate rheometer. It was found that the physical stiffness effect of GO sheets leads to the increase of the zero-field shear modulus with increasing GO content under both the steady-state and dynamic shear loads. The chemical crosslinking density of PDMS matrix decreases with the GO content due to the strong physical crosslinking between GO and the PDMS matrix. Thus, the MREs filled with higher GO content exhibit more fluid-like behavior. Under the dynamic shear load, the absolute MR effect increases with the GO content due to the increased flexibility of the PDMS matrix and the dynamic self-stiffening effect occurring in the physical crosslinking interfaces around GO sheets. The highest relative MR effect was achieved by the MREs filled with 0.1 wt.% GO sheets. Then, the relative MR effect decreases with the further increase of GO content due to the improved zero-field modulus and the increased agglomerations of GO and CIPs. This study shows that the addition of GO sheets is a possible way to prepare new MREs with high MR effect, while simultaneously possessing high zero-field stiffness and load bearing capability.