Effectiveness of various bioreactors for thraustochytrid culture and production ( Aurantiochytruim limacinum BUCHAXM 122)

• Published in: PeerJ (San Francisco, CA) Vol. 9; p. e11405
• Main Authors: Sirirak, Khanoksinee, Powtongsook, Sorawit, Suanjit, Sudarat, Jaritkhuan, Somtawin
• Format: Journal Article
• Language: English
• Published: San Diego PeerJ, Inc 27.05.2021; PeerJ Inc
• Subjects: Acid production; Aeration; Aurantiochytrium limacinum; Batch culture; Biomass; Bioreactors; Biotechnology; Bubble bioreactor; Cell Biology; Docosahexaenoic acid; Fatty acids; Foaming; Internal loop airlift bioreactor; Laboratories; Mass transfer; Microbiology; Microorganisms; Oxygen mass transfer coefficient; Pore size; R&D; Research & development; Silicones; Stirred tank bioreactor; United States > US
• ISSN: 2167-8359; 2167-8359
• DOI: 10.7717/peerj.11405

This study aimed to develop bioreactors for cultivation of thraustochytrid, Aurantiochytrium limacinum BUCHAXM 122, that are low in cost and simple to operate. Obtaining maximum biomass and fatty acid production was a prerequisite. Three bioreactor designs were used: stirred tank bioreactor (STB), bubble bioreactor (BB) and internal loop airlift bioreactor (ILAB). The bioreactors were evaluated for their influence on oxygen mass transfer coefficient (k L a), using various spargers, mixing speed, and aeration rates. Biomass and DHA production from STB, BB, ILAB were then compared with an incubator shaker, using batch culture experiments. Results showed that a bundle of eight super-fine pore air stones was the best type of aeration sparger for all three bioreactors. Optimal culture conditions in STB were 600 rpm agitation speed and 2 vvm aeration rate, while 2 vvm and 1.5 vvm aeration provided highest biomass productivity in BB and ILAB, respectively. Antifoam agent was needed for all reactor types in order to reduce excessive foaming. Results indicated that with optimized conditions, these bioreactors are capable of thraustochytrid cultivation with a similar efficiency as cultivation using a rotary shaker. STB had the highest k L a and provided the highest biomass of 43.05 ± 0.35 g/L at 48 h. BB was simple in design, had low operating costs and was easy to build, but yielded the lowest biomass (27.50 ± 1.56 g/L). ILAB, on the other hand, had lower k L a than STB, but provided highest fatty acid productivity, of 35.36 ± 2.51% TFA.