Effect of the Surface Treatment Method Using Airborne-Particle Abrasion and Hydrofluoric Acid on the Shear Bond Strength of Resin Cement to Zirconia

• Published in: Dentistry journal Vol. 5; no. 3; p. 23
• Main Authors: Lee, Ju-Hyoung, Lee, Cheong-Hee
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 17.07.2017; MDPI
• Subjects: Abrasion; airborne-particle abrasion; Bond strength; Bonding strength; Dental cement; Etching; Hydrofluoric acid; Phase transitions; shear bond strength; Surface roughness; Surface treatment; Variance analysis; Zirconia; Zirconium dioxide; hydrofluoric acid; shear bond strength; zirconia; airborne-particle abrasion
• ISSN: 2304-6767; 2304-6767
• DOI: 10.3390/dj5030023

The purpose of this study was to evaluate the shear bond strength (SBS) of two different resin cements (Panavia F 2.0 (Kuraray Medical Inc, Okayama, Japan) and Variolink N (Ivoclar Vivadent AG, Schaan, Liechtenstein)) to 112 zirconia specimens with airborne-particle abrasion and 20%, 30%, or 40% hydrofluoric acid (HF) for 1 or 2 h. A total of eight specimens were used to observe the phase transformation after surface treatments. Six specimens were treated only with HF etching and the average surface roughness (Ra) was analyzed. A one-way ANOVA test was applied for SBS and the effect of HF concentration on Ra. An independent t-test was performed for the comparison of Panavia F 2.0 and Variolink N, and the influence of the HF application time on Ra. A higher HF solution increased SBS and Ra. HF etching produced a lower rate of monoclinic phase transformation. Panavia F 2.0 showed a higher SBS than Variolink N.