Enhanced performance of solid oxide fuel cell fabricated by a replica technique combined with infiltrating process

• Published in: International journal of hydrogen energy Vol. 39; no. 25; pp. 13217 - 13223
• Main Authors: Han, Da, Liu, Yadi, Wang, Shaorong, Zhan, Zhongliang
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 22.08.2014; Elsevier
• Subjects: Alternative fuels. Production and utilization; Applied sciences; Carbon; Contact; Discharge; Energy; Exact sciences and technology; Fuel cell; Fuel cells; Fuels; Hydrogen; Interfacial contact; Nickel; Performance degradation; Replica technique; Replicating; Solid oxide fuel cells; Stability; Interfacial contact; Stability; Replica technique; Fuel cell; Hydrogen; Performance; Solid oxide fuel cell
• ISSN: 0360-3199; 1879-3487
• DOI: 10.1016/j.ijhydene.2014.06.123

For the convenience of hermetic sealing, first time, a replica technique is successfully invented in this study to fabricate the dissymmetrical tri-layer structure of “porous La0.9Sr0.1Ga0.8Mg0.2O3 (LSGM) |dense LSGM| porous LSGM” skeleton by adopting a carbon layer. SEM analysis reveals that the bonding strength of interfacial contact between dense LSGM and porous LSGM can also be improved when using this new fabrication method. Metal Ni and layered perovskite oxide SmBa0.5Sr0.5Co2O5 (SBSCO) are then infiltrated into the dissymmetrical skeleton on each side to form the functional fuel cell. The OCV are close to the expected Nernst potentials which demonstrate that the cell fabricated in this study can be well sealed. The maximum power densities of functional fuel cell with configuration of “Ni–LSGM |LSGM| LSGM–SBSCO” are 0.12 W cm−2, 0.38 W cm−2, 1 W cm−2 and 1.8 W cm−2 at 400, 450, 500, 550 °C, respectively. Though long term stability testing shows a rapid performance degradation when discharged at 0.7 V for 80 h, by changing pure Ni to Ni–SDC mixed oxide, the performance of functional fuel cell with configuration of “Ni–SDC–LSGM |LSGM| LSGM–SBSCO” increases and the long term stability is largely improved. •High performance functional fuel cells were fabricated by a novel replica technique combined with infiltrating process.•Maximum power densities of 1.8 W cm−2, 1 W cm−2, 0.38 W cm−2 and 0.12 W cm−2 at 550 °C, 500 °C, 450 °C and 400 °C were obtained.•An almost constant current density of 1.14 A/cm2 at 500 °C was achieved when discharged at 0.7 V for 80 h.