Cement Paste Mixture Proportioning with Particle Packing Theory: An Ambiguous Effect of Microsilica

• Published in: Materials Vol. 14; no. 22; p. 6970
• Main Authors: Niewiadomski, Paweł, Karolak, Anna, Stefaniuk, Damian, Królicka, Aleksandra, Szymanowski, Jacek, Sadowski, Łukasz
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 18.11.2021; MDPI
• Subjects: Additives; Aggregates; Alkali-silica reactions; Building materials; Cement hydration; Cement paste; Composite materials; Compressive strength; Concrete; Construction materials; Environmental impact; Grain size; Indentation; Mechanical properties; microsilica; Nanoparticles; Optimization; Packing density; packing density model; Physical properties; Porosity; Proportioning (mixing); Silica fume; Silicon dioxide; Sustainable development
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma14226970

Recently, the research of innovative building materials is focused on applying supplementary materials in the form of micro- and nanopowders in cementitious composites due to the growing insistence on sustainable development. Considering above, in paper, a research on the effect of microsilica and SiO2 nanoparticles addition to cement paste, designed with Andreasen and Andersen (AA) packing density model (PDM), in terms of its physical and mechanical properties was conducted. Density, porosity, compressive strength, hardness, and modulus of indentation were investigated and compared regarding different amount of additives used in cement paste mixes. Microstructure of the obtained pastes was analyzed. The possibility of negative influence of alkali-silica reaction (ASR) on the mechanical properties of the obtained composites was analyzed. The results of the conducted investigations were discussed, and conclusions, also practical, were presented. The obtained results confirmed that the applied PDM may be an effective tool in cement paste design, when low porosity of prepared composite is required. On the other hand, the application of AA model did not bring satisfactory results of mechanical performance as expected, what was related, as shown by SEM imaging, with inhomogeneous dispersion of microsilica, and creation of agglomerates acting as reactive aggregates, what as a consequence caused ASR reaction, crack occurrence and lowered mechanical properties. Finally, the study found that the use of about 7.5% wt. of microsilica is the optimum in regards to obtain low porosity, while, to achieve improved mechanical properties, the use of 4 wt. % of microsilica seems to be optimal, in the case of tested cement pastes.