Low-Temperature Ethanol Sensor via Defective Multiwalled Carbon Nanotubes

• Published in: Materials Vol. 15; no. 13; p. 4439
• Main Authors: Shaalan, Nagih M., Ahmed, Faheem, Rashad, Mohamed, Saber, Osama, Kumar, Shalendra, Aljaafari, Abdullah, Ashoaibi, Adil, Mahmoud, Amera Z., Ezzeldien, Mohammed
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 23.06.2022; MDPI
• Subjects: 1D nanostructures; Carbon; Chemical vapor deposition; Crystal defects; defective carbon nanotubes; Defects; Dipole interactions; Ethanol; ethanol sensor; Gas sensors; Gases; Graphene; Low temperature; Medical research; Multi wall carbon nanotubes; Nitrogen dioxide; Operating temperature; Power consumption; sensing properties; Sensors; Spectrum analysis; Traffic police; United Kingdom > UK; Japan
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma15134439

This paper focuses on the fabrication of defective-induced nanotubes via the catalytic chemical vapor deposition method and the investigation of their properties toward gas sensing. We have developed defective multi-walled carbon nanotubes with porous and crystalline structures. The catalyst layer used in CNTs’ growth here was based on 18 and 24 nm of Ni, and 5 nm of Cr deposited by the dc-sputtering technique. The CNTs’ defects were characterized by observing the low graphite peak (G-band) and higher defect peaks (D-band) in the Raman spectrum. The defectives sites are the main source of the sensitivity of materials toward different gases. Thus, the current product was used for sensing devices. The device was subjected to various gases such as NO, NO2, CO, acetone, and ethanol at a low operating temperature of 30 °C and a concentration of 50 ppm. The sensor was observed to be less sensitive to most gas while showing the highest response towards ethanol gas. The sensor showed the highest response of 8.8% toward ethanol at 30 °C of 50 ppm, and a low response of 2.8% at 5 ppm, which was investigated here. The signal repeatability of the present sensor showed its capability to detect ethanol at much lower concentrations and at very low operating temperatures, resulting in reliability and saving power consumption. The gas sensing mechanism of direct interaction between the gas molecules and nanotube surface was considered the main. We have also proposed a sensing mechanism based on Coulomb dipole interaction for the physical adsorption of gas molecules on the surface.