Effect of Laser Parameters on Processing of Biodegradable Magnesium Alloy WE43 via Selective Laser Melting Method

• Published in: Materials Vol. 13; no. 11; p. 2623
• Main Authors: Suchy, Jan, Horynová, Miroslava, Klakurková, Lenka, Palousek, David, Koutny, Daniel, Celko, Ladislav
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 09.06.2020; MDPI
• Subjects: 3-D printers; 3D printing; additive manufacturing; Biodegradability; Biomedical materials; Bones; Continuity; Corrosion resistance; Flux density; Humidity; Laser beam melting; Laser beam welding; Lasers; Magnesium alloys; Magnesium base alloys; Mg-alloy; Microhardness; Optical microscopy; Parameters; Particle size; Printing; Quality; Scanning; single track; surface quality; Surface roughness; thin wall; Thin walls; Transplants & implants; Welded joints; United States > US; Japan
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma13112623

The global aim of the theme of magnesium alloy processing by the selective laser melting technology is to enable printing of replacements into the human body. By combining the advantages of WE43 magnesium alloy and additive manufacturing, it is possible to print support structures that have very similar properties to human bones. However, printing magnesium alloy parts is very difficult, and the printing strategies are still under development. Knowledge of weld deposit behaviour is needed to design a complex printing strategy and still missing. The main aim of the manuscript is the find a stable process window and identify the dependence of the weld deposit shape and properties on the laser power and scanning speed. The range of the tested parameters was 100–400 W and 100–800 mm/s for laser power and scanning speed. The profilometry and light microscopy were used to verify the continuity and shape evaluation. The microhardness and EDX analysis were used for the detailed view of the weld deposit. The manuscript specifies the weld deposit dimensions, their changes depending on laser power and scanning speed, and the continuity of the weld tracks. The stable weld deposits are made by the energy density of 5.5–12 J/mm2. Thin walls were also created by layering welds to determine the surface roughness scattering (Ra 35–60) for various settings of laser power and scanning speed.