An Internal-State-Variable-Based Continuous Dynamic Recrystallization Model for Thermally Deformed TC18 Alloy

• Published in: Materials Vol. 17; no. 16; p. 4026
• Main Authors: Wu, Gui-Cheng, Lin, Yong-Cheng, Wan, Miao, Zeng, Ning-Fu, Zhang, Song, Zhang, Hui-Jie, Chen, Ming-Song, Jiang, Yu-Qiang
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 13.08.2024; MDPI
• Subjects: Alloys; Aluminum; Behavior; Continuity (mathematics); Correlation coefficients; Crystal dislocations; Crystallites; Deformation; Dislocation density; Dynamic recrystallization; Error analysis; Grain boundaries; Grain size; Grain sub boundaries; Hot forming; Microstructure; Misalignment; Root-mean-square errors; Specialty metals industry; Stacking fault energy; State variable; Substructures (crystalline); Temperature; Titanium; Titanium base alloys; True stress; Yield strength; continuous dynamic recrystallization; microstructure; TC18 alloy; thermomechanical processing; internal state variables
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma17164026

Continuous dynamic recrystallization (CDRX) is widely acknowledged to occur during hot forming and plays a significant role in microstructure development in alloys with moderate to high stacking fault energy. In this work, the flow stress and CDRX behaviors of the TC18 alloy subjected to hot deformation across a wide range of processing conditions are studied. It is observed that deformation leads to the formation of new low-angle grain boundaries (LAGBs). Subgrains rotate by absorbing dislocations, resulting in an increase in LAGB misorientation and the transition of some LAGBs into high-angle grain boundaries (HAGBs). The HAGBs migrate within the material, assimilating the (sub)grain boundaries. Subsequently, an internal state variable (ISV)-based CDRX model is developed, incorporating parameters such as the dislocation density, adiabatic temperature rise, subgrain rotation, LAGB area, HAGB area, and LAGB misorientation angle distribution. The values of the correlation coefficient (R), relative average absolute error (RAAE), and root-mean-square error (RMSE) between the anticipated true stress and measured stress are 0.989, 6.69%, and 4.78 MPa, respectively. The predicted outcomes demonstrate good agreement with experimental findings. The evolving trends of the subgrain boundary area under various conditions are quantitatively analyzed by assessing the changes in dynamic recovery (DRV)-eliminated dislocations and misorientation angles. Moreover, the ISV-based model accurately predicts the decreases in grain and crystallite sizes with higher strain rates and lower temperatures. The projected outcomes also indicate a transition from a stable and coarse-grained microstructure to a continuously recrystallized substructure.