Environmental impact of timber frame walls

• Published in: IOP conference series. Earth and environmental science Vol. 323; no. 1; pp. 12141 - 12148
• Main Authors: Steeman, M, Himpe, E, Vanroelen, M, De Roeck, M
• Format: Journal Article
• Language: English
• Published: Bristol IOP Publishing 01.08.2019
• Subjects: Airtightness; Environmental impact; Fasteners; Joists; Studs; Timber; Timber construction; Walls
• ISSN: 1755-1307; 1755-1315
• DOI: 10.1088/1755-1315/323/1/012141

Timber frame walls are increasingly applied nowadays due to the stringent energy performance requirements of buildings. The aim of this study was to investigate the environmental impact of this type of construction. Therefore, a cradle to gate analysis was used. The study consists of three consecutive steps. First the impact of the constituting materials was studied. The results show e.g. that the environmental impact of LVL studs is significantly larger than that of SLS studs or I-joists. Based on these results on material level, in the second stage three timber frame walls were designed and evaluated. All walls had the same thermal performance. When comparing the results, it was noted that the environmental impact of the wall with the highest impact is three times larger than that of the wall with the lowest impact. Finally, the study also looked at the additional impact of tapes for guaranteeing the air tightness of timber frame constructions and at the impact of fasteners. It could be concluded that the impact of tapes is negligible when looking at the total impact of the wall (less than 1%). The fasteners on the other hand, lead to an increase in environmental impact with almost 20%.