Effect of the loading frequency on fatigue properties of JIS S15C low carbon steel and some discussions based on micro-plasticity behavior

• Published in: International journal of fatigue Vol. 66; pp. 29 - 38
• Main Authors: Guennec, Benjamin, Ueno, Akira, Sakai, Tatsuo, Takanashi, Masahiro, Itabashi, Yu
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier Ltd 01.09.2014; Elsevier
• Subjects: Applied sciences; Cyclic hardening; EBSD observations; Exact sciences and technology; Fatigue; Fatigue (materials); Fatigue tests; Frequency effect; Frequency ranges; Hysteresis loops; Low carbon steel; Low carbon steels; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metals. Metallurgy; Stress-strain relationships; Ultrasonic test; Ultrasonic testing; Yield stress; Cyclic hardening; Ultrasonic test; EBSD observations; Low carbon steel; Frequency effect; Electron diffraction; Cyclic load; Plasticity; Mechanical properties; Fatigue; Carbon steel; Strain hardening
• ISSN: 0142-1123; 1879-3452
• DOI: 10.1016/j.ijfatigue.2014.03.005

•Frequency effect was studied in wide loading frequency range of 0.2Hz to 20kHz.•S–N properties of S15C steel are dependant of the loading frequency.•From 0.2 to 140Hz, S–N properties can be normalized by the lower yield stress.•Such a procedure is not effective for ultrasonic tests results.•Local misorientation of 20kHz-fatigued samples presents an irregularity. Ultrasonic testing method has been often used to investigate fatigue properties of various metallic materials. Since ultrasonic fatigue tests are conducted at a very high loading frequency, they are particularly convenient for fatigue tests in the very high cycle regime. Indeed, ultrasonic fatigue method allows us to conduct fatigue tests up to 109–1010cycles in a definite period. However, due to the huge gap of loading frequency between ultrasonic testing method (around 20kHz) and usual testing method (most of the cases in the range 1–100Hz), the frequency effect on the fatigue property is still unclear. Low carbon steel is one of typical metallic materials to provide a significant discrepancy between fatigue strengths obtained under ultrasonic testing frequency and under usual testing frequency range. Thus, by preparing a lot of specimens of JIS S15C low carbon steel (0.15% C), fatigue tests were carried out in a wide range of the loading frequency. The frequency effect on the S–N property was first examined and a useful procedure was proposed to obtain a common S–N property normalized by the lower yield stress. In addition, micro-plasticity behavior such as the stress–strain hysteresis loop and the local misorientation were also measured and the frequency effect on the fatigue property was discussed.