Multiple Fatigue Failure Behaviors and Long-Life Prediction Approach of Carburized Cr-Ni Steel with Variable Stress Ratio

• Published in: Materials Vol. 10; no. 9; p. 1084
• Main Authors: Deng, Hailong, Li, Wei, Zhao, Hongqiao, Sakai, Tatsuo
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI 14.09.2017; MDPI AG
• Subjects: carburized steel; initiation and growth; interior failure; life prediction; stress ratio; interior failure; stress ratio; life prediction; initiation and growth; carburized steel
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma10091084

Axial loading tests with stress ratios of -1, 0 and 0.3 were performed to examine the fatigue failure behavior of a carburized Cr-Ni steel in the long-life regime from 10⁴ to 10⁸ cycles. Results show that this steel represents continuously descending characteristics with interior inclusion-induced failure under = -1, whereas it shows duplex characteristics with surface defect-induced failure and interior inclusion-induced failure under = 0 and 0.3. The increasing tension eliminates the effect of compressive residual stress and promotes crack initiation from the surface or interior defects in the carburized layer. The FGA (fine granular area) formation greatly depends on the number of loading cycles, but can be inhibited by decreasing the compressive stress. Based on the evaluation of the stress intensity factor at the crack tip, the surface and interior failures in the short life regime can be characterized by the crack growth process, while the interior failure with the FGA in the long life regime can be characterized by the crack initiation process. In view of the good agreement between predicted and experimental results, the proposed approach can be well utilized to predict fatigue lives associated with interior inclusion-FGA-fisheye induced failure, interior inclusion-fisheye induced failure, and surface defect induced failure.