Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors

• Published in: Materials Vol. 8; no. 12; pp. 8338 - 8354
• Main Authors: Deng, Hailong, Li, Wei, Sakai, Tatsuo, Sun, Zhenduo
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI 02.12.2015; MDPI AG
• Subjects: Cr-Ni-W steel; initiation and growth; interior failure; life prediction; local stress distribution; very high cycle fatigue; local stress distribution; interior failure; Cr-Ni-W steel; life prediction; initiation and growth; very high cycle fatigue
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma8125459

The unexpected failures of structural materials in very high cycle fatigue (VHCF) regime have been a critical issue in modern engineering design. In this study, the VHCF property of a Cr-Ni-W gear steel was experimentally investigated under axial loading with the stress ratio of = -1, and a life prediction model associated with crack initiation and growth behaviors was proposed. Results show that the Cr-Ni-W gear steel exhibits the constantly decreasing property without traditional fatigue limit, and the fatigue strength corresponding to 10⁸ cycles is around 485 MPa. The inclusion-fine granular area (FGA)-fisheye induced failure becomes the main failure mechanism in the VHCF regime, and the local stress around the inclusion play a key role. By using the finite element analysis of representative volume element, the local stress tends to increase with the increase of elastic modulus difference between inclusion and matrix. The predicted crack initiation life occupies the majority of total fatigue life, while the predicted crack growth life is only accounts for a tiny fraction. In view of the good agreement between the predicted and experimental results, the proposed VHCF life prediction model involving crack initiation and growth can be acceptable for inclusion-FGA-fisheye induced failure.