Response Characteristics of Contactless Impedance Detection (CID) Sensor on Slug Flow in Small Channels: The Investigation on Slug Separation Distance

• Published in: Sensors (Basel, Switzerland) Vol. 22; no. 22; p. 8987
• Main Authors: Wang, Chenxu, Huang, Junchao, Ji, Haifeng, Huang, Zhiyao
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 20.11.2022; MDPI
• Subjects: Cameras; Channels; Communication; contactless impedance detection (CID); Electric Impedance; Electrodes; Experiments; Impedance; Investigations; Pipes; sensor; Sensors; Separation; Signal processing; Slug flow; small channels; Two phase flow; Beijing China; China; slug flow; sensor; contactless impedance detection (CID); small channels
• ISSN: 1424-8220; 1424-8220
• DOI: 10.3390/s22228987

In recent years, CID sensors have displayed great development potential in parameter measurement of gas-liquid two-phase flow in small channels. However, the fundamental/mechanism research on the response characteristics of CID sensors is relatively insufficient. This work focuses on the investigation of the influence of separation distance between slugs on the impedance (real part, imaginary part and amplitude) response characteristics of slug flow in small channels. Experiments were carried out with the CID sensors in four small channels with inner pipe diameters of 1.96 mm, 2.48 mm, 3.02 mm and 3.54 mm, respectively. The experimental results show that for a CID sensor, the slug separation distance has significant influence on the impedance response characteristics. There is a critical value of slug separation distance. When the slug separation distance is larger than the critical value, the impedance response characteristics of each slug can be considered independent of each other, i.e., there is no interaction between the slugs. When the slug separation distance is less than the critical value, the impedance response characteristics show obvious interaction between the slugs. It is indicated that the ratios of the critical values to the pipe inner diameters are approximate 100.