Failure mode transition in AHSS resistance spot welds. Part I. Controlling factors

• Published in: Materials science & engineering. A, Structural materials : properties, microstructure and processing Vol. 528; no. 29; pp. 8337 - 8343
• Main Authors: Pouranvari, M., Marashi, S.P.H.
• Format: Journal Article
• Language: English
• Published: Kidlington Elsevier B.V 15.11.2011; Elsevier
• Subjects: Advanced high strength steels; Applied sciences; Exact sciences and technology; Failure; Failure mode; Failure modes; Fracture mechanics; Fractures; Hardness; Joining, thermal cutting: metallurgical aspects; Mathematical analysis; Mathematical models; Mechanical properties and methods of testing. Rheology. Fracture mechanics. Tribology; Metals. Metallurgy; Microstructure; Resistance spot welds; Spot welds; Voids; Welding; Failure mode; Advanced high strength steels; Resistance spot welds; Microstructure; Shear test; High strength steel; Rupture; Hardness; Tension test; Thickness; Analytical method; Spot welding; Fractography; Fracture mode
• ISSN: 0921-5093; 1873-4936
• DOI: 10.1016/j.msea.2011.08.017

► Interfacial to pullout failure mode transition for AHSS RSWs is studied. ► An analytical mode is proposed to predict failure mode of AHSS RSWs. ► Hardness characteristics of RSWs plays key role in the failure mode transition. Failure mode of resistance spot welds is a qualitative indicator of weld performance. Two major types of spot weld failure are pull-out and interfacial fracture. Interfacial failure, which typically results in reduced energy absorption capability, is considered unsatisfactory and industry standards are often designed to avoid this occurrence. Advanced High Strength Steel (AHSS) spot welds exhibit high tendency to fail in interfacial failure mode. Sizing of spot welds based on the conventional recommendation of 4 t 0.5 ( t is sheet thickness) does not guarantee the pullout failure mode in many cases of AHSS spot welds. Therefore, a new weld quality criterion should be found for AHSS resistance spot welds to guarantee pull-out failure. The aim of this paper is to investigate and analyze the transition between interfacial and pull-out failure modes in AHSS resistance spot welds during the tensile–shear test by the use of analytical approach. In this work, in the light of failure mechanism, a simple analytical model is presented for estimating the critical fusion zone size to prevent interfacial fracture. According to this model, the hardness ratio of fusion zone to pull-out failure location and the volume fraction of voids in fusion zone are the key metallurgical factors governing type of failure mode of AHSS spot welds during the tensile–shear test. Low hardness ratio and high susceptibility to form shrinkage voids in the case of AHSS spot welds appear to be the two primary causes for their high tendency to fail in interfacial mode.