Mechanistic studies of chemical looping desulfurization of Mn-based oxides using in situ X-ray absorption spectroscopy

• Published in: Applied energy Vol. 113; pp. 1895 - 1901
• Main Authors: König, C.F.J., Nachtegaal, M., Seemann, M., Clemens, F., van Garderen, N., Biollaz, S.M.A., Schildhauer, T.J.
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01.01.2014
• Subjects: Biomass; Chemical looping; Gas cleaning; Manganese; XAS; Gas cleaning; Biomass; XAS; Chemical looping; Manganese
• ISSN: 0306-2619; 1872-9118; 1872-9118
• DOI: 10.1016/j.apenergy.2013.04.075

•Mn sorbents remove H2S from hot syngas in chemical looping desulfurization process.•State of Mn followed by in situ X-ray absorption spectroscopy and mass spectrometry.•Two-step mechanism explains the formation of SO2 under reducing conditions. Cleaning of producer gas from biomass gasification is required for further processing, e.g. to avoid catalyst poisoning in subsequent conversion steps. High-temperature gas cleaning, of which sulfur removal is an important part, is a promising way to improve the overall efficiency of biomass conversion. In a high temperature “chemical looping desulfurization” process, a sorbent material, here manganese oxide, is cycled between producer gas from the gasifier to remove sulfur species, and an oxidizing atmosphere, in which the sulfur species are released as SO2. Alternatively, the use of such material as reactive bed material could be integrated into an allothermal dual fluidized bed gasifier. In a laboratory reactor, we subjected manganese-based materials to a periodically changing gas atmosphere, simulating a “chemical looping desulfurization” reactor. The “fuel reactor” gas contained H2, CO, CH4 and H2S, similar as in the producer gas, and the “oxidizing reactor” contained diluted O2. Mass spectrometry showed that most of the H2S is taken up by the sample in the “fuel reactor” part, while also some unwanted SO2 is generated in the “fuel reactor” part. Most of the sulfur is released in the oxidizing reactor. Simultaneous in situ X-ray absorption spectroscopy (XAS) of the Mn materials during different stages of the chemical looping desulfurization process showed that the initial Mn3O4 is transformed in the presence of H2S to MnS via a MnO intermediate in the fuel reactor. Oxygen from the reduction of Mn3O4 oxidizes some H2S to the undesired SO2 in the fuel reactor. Upon exposure to O2, MnS is again oxidized to Mn3O4 via MnO, releasing SO2. The presence of CO and/or CH4 in the fuel reactor has no effect on this mechanism. Measuring the structure–performance relationship of gas cleaning materials with in situ methods will enable knowledge-based materials development for improved performance.